If you’re building a micro racer or just looking for the smallest fully featured F3 flight controller this is the FC for you. Everything you need for truly tiny setup in a 27mm stack.
The FC is designed to fit 20x20mm mounting holes but can be mounted on standard 30.5mm spaced frames using double sided tape or a FC converter.
This tiny board can power up to 50A using the built in PDB for micro builds or stack onto a separate PDB or 4in1 ESCs for larger quads. Building with a 20x20mm stack is lighter and neater and delivers all the performance found in larger, heavier boards.
Used in combination with the stackable 20mm VTX this tiny powerhouse combines an FC, PDB, 40CH switcher VTX and OSD in a package weighing less than 8g.
FPV and receivers are taken care of with a 2A 5V BEC as well as a filtered VBAT passthrough for powering a high voltage VTX.
- Full features
- F3 STM32 MPU-6000 SPI
- Up to 5S capable 50A PDB
- 5V 2A LC filtered BEC output
- Supports, Sbus, ,SumH, SumD, Spektrum, Xbus, PPM
- Dedicated spectrum satellite port
- Buzzer and LED support
- Frisky, smartport and HoTT telemetry
- 3 independent UART serial ports
- Built in iLaps transponder support
- 2.9g bare board weight
*FC and header pins are included. VTX sold separately.