The DC130 is Atto’s smallest frame designed for 3″ props. It may be tiny but it can hang with the big boys. Forget flimsy frames and CMOS cameras. This strong 3mm dead cat configuration frame can be built with a choice of top plates to accommodate standard or micro components while still leaving room for an HS1177 camera and full size VTX.
The kit is supplied with all the options you need to build an indoor nipper or an acro monster. It’s up to you.
The DC130 offers greater camera protection than the 136-R and is ideal for fast acro flying
The shorter rear arms add strength, reduce weight and give the DC130 an aggressive stance. If running a micro 20x20mm stack the rear props will clear completely. If you choose to run a 30.5mm stack, carbon motor risers are included in the kit for extra clearance if needed.
If you require even more room for transponders or LED’s the piggyback plate allow you to protect these items using the included 10mm standoffs.
What do you get?
Unlike any other frame out there, we offer you 3 different top plates and all of the following:
- 3mm DC130 frame
- 1.5mm Nano plate
- 1.5mm Micro plates
- 1.5mm Piggyback plate
- 35mm alloy main standoffs
- 10mm alloy piggyback standoffs
- Titanium M3 bolts
- Alloy M3 FC bolts
- Alloy 5mm FC spacers
- 3mm motor risers
- Alloy M5 motor nuts
- XT-30 connector
- M5 Spanner / keyring
Bare frame weight with 1.5mm nano top plate, 35mm alloy standoffs, titanium bolts – 33.9g (orange)
Bare frame weight with 3mm micro top plate, 40mm alloy standoffs, titanium bolts – 41.5g (red)
Bare frame weight with 3mm nano top plate, Gopro session mount, titanium bolts – 62.7g (red/gold)